Closers

Gate closer, black finish

By digiadmin / 28 September 2021 / Comments Off on Gate closer, black finish

The robust and reliable GSB gas strut is a top seller due to its suitability for a wide range of applications from commercial gates to ornate wrought iron.

The gas strut is mounted on the inside of the gate and with its dampened action will not ‘slam’ the gate closed.  Exceptionally easy to install due to the innovative design of the adjustable brackets included.

KEY FEATURES
  • Weld on adjustable brackets included
  • Unique oil dampened design to control closing speed
  • Black finish designed for exterior use
  • No need to reduce gas simply move the strut along the slots in the brackets to adjust closing force
  • Suitable for gates up to 80kg
PRODUCT OPTIONS
  • GSB – Weld on gate closing strut
Read More

Gate closer, black finish, screw-fixed

By digiadmin / 28 September 2021 / Comments Off on Gate closer, black finish, screw-fixed

The robust and reliable GSB gas strut is a top seller due to its suitability for a wide range of applications from commercial gates to ornate wrought iron.

The gas strut is mounted on the inside of the gate and with its dampened action will not ‘slam’ the gate closed.  Exceptionally easy to install due to the innovative design of the adjustable brackets included.

KEY FEATURES
  • Weld on adjustable brackets included
  • Unique oil dampened design to control closing speed
  • Black finish designed for exterior use
  • No need to reduce gas simply move the strut along the slots in the brackets to adjust closing force
  • Suitable for gates up to 80kg
PRODUCT OPTIONS
  • GSB – Weld on gate closing strut
Read More

Hydraulic gate closer and hinge kit

By digiadmin / 28 September 2021 / Comments Off on Hydraulic gate closer and hinge kit

The hydraulic APS closer safely and reliably closes gates up to 150kg.  Mounted and welded underneath the gate, the unit is therefore unobtrusive and hidden inside its own steel case. It also acts as a load-bearing lower hinge.  This unit is highly vandal resistant. It can be used for right and left handed gates. It does not require any power either.

The closing speed is easily adjusted using the special key provided. In addition, due to the two separate speed adjustment valves, the latching speed can be set separately to the closing speed.  A fully adjustable top bracket is furthermore included. Finally the adjustable top hinge allows the gate to be correctly positioned after installation.

The APSSTOP kit comes with a special built-in stop hinge which will prevent the gate from opening wider than 100 degrees. It consequently protects the closer from any damage.

KEY FEATURES
  • Very robust unit, tried and tested and vandal resistant
  • For gates up to 150kg
  • Meets ROSPA recommendations
  • Speed adjustable
  • No power required and maintenance free
  • Will allow a gate to be opened both ways if required and close to the centre
  • Optional stop hinge to prevent the gate opening wider than 100 degrees
PRODUCT OPTIONS
  • APS – with round clamp top hinge
  • APSSTOP – with built-in 100° stop hinge
Read More

Hydraulic gate closer and hinge kit – Bolt on

By digiadmin / 28 September 2021 / Comments Off on Hydraulic gate closer and hinge kit – Bolt on
Read More

Hydraulic gate closer and hinge kit with stop hinge

By digiadmin / 28 September 2021 / Comments Off on Hydraulic gate closer and hinge kit with stop hinge

The hydraulic APS closer safely and reliably closes gates up to 150kg.  Mounted and welded underneath the gate, the unit is therefore unobtrusive and hidden inside its own steel case. It also acts as a load-bearing lower hinge.  This unit is highly vandal resistant. It can be used for right and left handed gates. It does not require any power either.

The closing speed is easily adjusted using the special key provided. In addition, due to the two separate speed adjustment valves, the latching speed can be set separately to the closing speed.  A fully adjustable top bracket is furthermore included. Finally the adjustable top hinge allows the gate to be correctly positioned after installation.

The APSSTOP kit comes with a special built-in stop hinge which will prevent the gate from opening wider than 100 degrees. It consequently protects the closer from any damage.

KEY FEATURES
  • Very robust unit, tried and tested and vandal resistant
  • For gates up to 150kg
  • Meets ROSPA recommendations
  • Speed adjustable
  • No power required and maintenance free
  • Will allow a gate to be opened both ways if required and close to the centre
  • Optional stop hinge to prevent the gate opening wider than 100 degrees
PRODUCT OPTIONS
  • APS – with round clamp top hinge
  • APSSTOP – with built-in 100° stop hinge
INSTALLATION

First of all, download the product’s spec sheet above for the complete step-by-step (see: Product Download).

Read More